Budget Water® is a trademark of Budget Water International, Inc. |
|
 |
|
|
Water Filtration System M NOTE: Anyone considering purchasing well water treatment equipment, should first gather the information required under items, 7, 16 and 17 on this page: http://www.budgetwater.com/article_faq's.htm This Well Water Filtration System includes a Chemical Feeder a Retention Tank a 10" Carbon Tank and a 30,000 Grain Capacity OnDemand Water Softener to provide you with clean soft water throughout the entire house. No matter what problem you have with your well water, we have a system for you. Be sure to check with a water quality technician by phone or e-mail to be certain you are ordering the correct treatment system.
30 GPD Pulse feeding injection pump in either 110v or 220v.
These units are useful when the water needs "contact time".
Full house backwashing carbon tank.
State of the art all digital, electronic control valve.
This well water filtration system is suitable for households of up to four people. It is a high quality, efficient, durable system that will provide you with clean, soft water for years to come. Enjoy pure, fresh water while protecting your home and family from unwanted contaminants. Chemical Feeder System, this is a 30 GPD pulse feeding injection pump in either 110v or 220v and comes complete with all hoses, injection fitting, suction basket, degasser line and a 15 Gallon solution tank. It can be used to inject soda ash or in severe cases caustic soda to raise pH and eliminate problems associated with acidic water. You can also use this same system to inject chlorine to kill harmful and nuisance bacteria. The same pump can be used to do both in most cases. Please note that for Ecoli and Coliform bacteria you need 20 to 30 minutes of contact time. To obtain the necessary contact time, you need 20 gallons of retention for every 1gallon per minute of flow rate to effectively kill the bacteria. Chemical Feeder Technical Data: Retention Tank A retention tank is normally used to allow contact time between your water and a chemical that is being injected. It would all depend on what is being injected and why to determine the size of retention needed. To make certain that you have enough retention time with chlorine to kill bacteriums such as e-coli and coliform, you need a minimum of twenty minutes contact time. To obtain that twenty minutes you need twenty gallons of retention for every one gallon per minute flow. (To determine your flow rate, please see item #7 on this page: Articles / FAQ's For example, if you have six gallons per minute flow rate, you would need one hundred twenty gallon retention (6 x 20=120) 6 GPM flow x 20 minute retention = 120 gallon retention tank. The tanks themselves are made of polymer materials and have a seamless, one piece polyethylene inner shell. They are lightweight and very durable with 1 1/4" socket connections on the top and bottom. Other sizes are available here. 10" Carbon Tank A whole house backwashing carbon filter comes with a 10x54 tank, all digital state of the art control valve, and 1.5 cubic feet of activated carbon. Carbon filtration is most commonly used to remove chlorine from water. Carbon is also a very good filtration media for removing or reducing hundreds of other chemicals and impurities as well as many tastes and odors. The only maintenance required on the carbon filter is to change out the carbon once it has reached it's removal capacity, which averages every five to seven years for a family of four. It is inexpensive to replace, costing about $150 for 1.5 cubic ft. of GAC. It is a very economical way to give your family clean, odorless great tasting water. Please keep in mind that carbon is NOT a substitute for reverse osmosis after a water softener. Carbon does not remove sodium. 30,000 Grain Capacity On Demand water softener (7138A) includes the mineral tank, 1 cubic foot of resin, control valve, brine tank, brine well, and brine valve. This unit regenerates (cleans itself) with "state of the art" 'metered' controls. Which means it only regenerates as needed, saving you water and salt (or potassium), as compared to 'timer' models. Usually either once or twice per week, depending on the quality of water. Upgrade to a Deluxe Model for only $100 more. Both standard and deluxe water softener systems are made with the highest quality, name brand valves and controls. Both styles of water conditioners are smart enough to only regenerate early in the morning (or whenever you tell them to). Sizing Chart Families with 1-2 people: 15k grain water softener unit Families with 1-4 people: 30k grain water softener unit Families with 1-6 people: 40k grain water softener unit Families with 1-6+ people: 50k grain water softener unit 8 or more people: 60k+ grain water softener unit Please Note: For homes with an automatic dishwasher, count the dishwasher as 1/2 person when sizing your home water softener. Also Note: For homes with an automatic clothes washer, count the clothes washer as 1/2 person when sizing your home water softener. Having trouble sizing or deciding on one of our Well Water Filtration Systems? Call one of our expert technicians to see which Well Water System is right for you. Keep in mind our technicians are not allowed to ask you to buy anything or pressure you in ANY way. They just answer your questions and give you great advice. We are the online leader for water treatment worldwide. We set the standard for all others to follow. NOTE: You should NEVER drink the water from ANY filtration system that uses salt. You can add a Reverse Osmosis System for $199 and have pure, clean great tasting water for your drinking and cooking needs. ALSO NOTE: You should NEVER attempt to use a water softener filtration system to remove iron. read why on our Iron Softener page.
|
|
WARNING:
When it comes to treatment equipment you should NEVER do business with ANY
company who does not have the same certifications as we do. It is just plain
crazy. There are so many "Fly by night" companies out there that it should be
the very FIRST rule in your decision making process. It is your first, and some
times ONLY, line of defense. Just look at our
home page to see our many appropriate
certifications. You will find them all in the top third of the page. Budget Water® USA: 1.800.701.9914 email: budgetwater@budgetwater.com NOTE: Purchasing anything from this site means you have read, and agree to, all of the conditions of our: " terms- of- service" page. Culligan® is a registered trademark of Culligan®, Inc., RainSoft® is a registered trademark of RainSoft Water Conditioning company, Kinetico® is a registered trademark of Kinetico Incorporated, Hague® is a registered trademark of Wm. R. Hague Inc., Cuno® is a registered trademark of Cuno Incorporated, Rayne® is a registered trademark of Rayne Corporation, Ionics® is a registered trademark of Ionics, Incorporated, Ecowater® is a registered trademark of Ecodyne Corporation. Budget Water International, Inc. is not affiliated with Culligan®, Inc., RainSoft® Water Conditioning Co., Kinetico® Incorporated, Wm. R. Hague®, Inc., Cuno® Incorporated, Rayne® Corporation, or Ecodyne Corporation. Budgetwater® is a trademark of Budget Water International, Inc. This site is protected by copyright and trademark laws under U.S. law. All rights reserved.
Related Resources (1)(2)(3) *We manufacture most of our equipment from scratch. We use only premium national name brand components on all equipment that we sell. The same people that make equipment for many other national PREMIUM brand companies make them for us as well. Three of the top control valve makers are Fleck, Autotrol and Clack; we carry all three types and many of the other top brands as well. Send mail to
Company
Webmaster with questions or comments about this web site.
|
